Welcome To Honrel Epoxy’s Website!
Position > >Index >Product >Additives
PRODUCTS

HW 6800 Epoxy deformer

HW 6800 Epoxy deformer (BYK-530)
+86 186 7297 6718
Detailed introduction:

HW 6800 Epoxy deformer BYK-530

Composition: Special modified siloxane

Typical Physical Data

HW 6800

Appearance

Active portion

Solvent

Milky white translucent liquid

100

N/A


Application range: solvent-based coatings; light-curing coatings, solvent-free coatings.


Recommended dosage: 0.1-1.0% of the total formula (please test the most appropriate dosage before use)


Usage: In order to obtain sufficient defoaming effect, it is recommended to add it before grinding. If added later, mix under sufficiently high shear to ensure defoaming.


Features and advantages:

It has excellent defoaming and anti-foaming effects, which can inhibit and eliminate the bubbles generated during the production, canning and construction of inks, especially for high-viscosity inks.

2. It is used in epoxy system, and has a good anti-foaming effect on epoxy roll coating.


Packaging: 25KG in drums.

Storage: Keep away from heat, fire and light.

Note: This product is sensitive to humidity and light, and is suitable for storage in dry conditions.

recommend